Difference between revisions of "Ingenico Tetra Payment Processing Terminal Setup"

From Cloud9 Payment Processing Gateway Documentation
Jump to: navigation, search
(Created page with "{{Template:C9Header|EMV Terminal/Pin Pad Setup}} =How add Certificate to Tetra= For instance, if we are adding '''Lane 3000''' Here are the steps to configure the device: 1....")
 
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
{{Template:C9Header|EMV Terminal/Pin Pad Setup}}
 
{{Template:C9Header|EMV Terminal/Pin Pad Setup}}
  
−
=How add Certificate to Tetra=
+
=Ingenico Tetra IP & PDC Setup=
−
For instance, if we are adding '''Lane 3000'''
+
[[https://c9pg.com/docs/PaymentDevices/Ingenico/Tetra/IngenicoTerminalSetup.pdf  Ingenico IP Setup]]
−
Here are the steps to configure the device:
 
−
1.Press 2-6-3-4-F
 
−
2.Enter TDA->Configuration
 
−
3.Communication->Select Comm. Type->Ethernet->Press Green key( OK )
 
−
4.Communication->Ethernet Settings->Connection Method->Client->Press Green key( OK )
 
−
5.Communication->Ethernet Settings->HostIP Address->34.213.177.219->Press Green key( OK )
 
−
6.Communication->Ethernet Settings->IP Port->12009->Press Green key( OK )
 
−
7.Communication->Ethernet Settings->SSL->None->Press Green key( OK )
 
−
8.Pressing RED(X-Cancel) key will return to previous menu...press it until it will prompt "Save and Reboot?"-> Choose Yes->Press Green key( OK )
 
−
Device will reboot...Enter "This lane closed"...leave it for a few seconds and it will start to download configuration and then it will reboot by itself
 
−
 
 
−
May need to add Attachment to C9pg folder on the workstation profile
 
−
certificate\PinPad\client\CLIENT_CERT.PEM
 
−
 
 
−
There should be a distinct  setup for Tetra make sure to check profile PDC/CONF com.jijesoft.gateway.pinpadNameList.ini
 
−
[DeviceOnDemand]
 
−
IWL258=true
 
−
L5000=true
 
−
L3000=true
 
−
IF you dont see the L3000=true then add it in there same as above.
 
−
 
 
−
They should be running PDC 2.01.07 for this function to work.
 
−
After the above open the PDC on the user profile and enter the IP of the device then test the PDC. You should be able to run a transaction on the terminal and see it on cloud9.
 

Latest revision as of 18:14, 14 May 2021




Cloud9 Payment Gateway Documentation. This site can also be reached at http://docs.cloud9paymentgateway.com

Ingenico Tetra IP & PDC Setup

[Ingenico IP Setup]

Retrieved from "https://c9pg.com/w/index.php?title=Ingenico_Tetra_Payment_Processing_Terminal_Setup&oldid=944"