Revision as of 21:08, 6 June 2018

Cloud9 Payment Gateway Documentation. This site can also be reached at http://docs.cloud9paymentgateway.com

Download

→Note:

Citrix environment requires setting the IPP320 on com port 32 (you will need to change it from the default port 96). Citrix does not scan for ports above 32.
If Windows Terminal Services are used , the PDC may not be on the local machine. So the CLCAPI.INI PDC URL entry should be set up using the IP address where the PDC is running.

If you have not done so, run the EMV Terminal Hardware Setup

@@ Line 1: / Line 1: @@
 {{Template:C9Header|PDC Setup}}
-=Overview=
-{{Template:PDC}}
-=Supported Terminals/Pin Pads=
-*We support and sell the full line of Ingenico Telium 2 EMV and NFC compliant devices, such as Ingenico IPP320, IWL350, ISC350, etc. All future Telium 2 devices will be supported automatically.  All Terminals and Pin Pads from that line are EMV compliant and operational. See [[#Hardware Setup]] below for more info.
-*Also supported are any and all MSR readers and non-EMV compliant pin pads for non-EMV transactions.
 =Download=
 ==MS Windows==
-'''&rarr;Note, that Citrix environment requires setting the IPP320 on com port 32 (you will need to change it from the default port 96). Citrix does not scan for ports above 32.'''<br>
+'''&rarr;Note:
+*Citrix environment requires setting the IPP320 on com port 32 (you will need to change it from the default port 96). Citrix does not scan for ports above 32.'''<br>
+*If Windows Terminal Services are used , the PDC may not be on the local machine.  So the CLCAPI.INI PDC URL entry should be set up using the IP address where the PDC is running.
 [http://www.cloud9paymentgateway.com/files/PDC/Win Cloud9 PDC MS Windows Install]